Connect with us

home decor ideas

How to Perform the Installation of Automatic Doors?

Published

on

The automatic doors are the most standardized in the world around us. We see them in many places such as airport terminals, office buildings, shopping centers, shops, supermarkets etc. It is a guarantee of security and functionality both for the companies that install them and for the customers who use them. In addition to the standard product, which is specially designed for accesses with intense movement of people, there is also the automatic telescopic sliding door, designed for entrances with limited space or in which a greater free passage amplitude than usual is needed; and the curved and semicircular sliding automatic door, which are designed, manufactured and installed with different radiums and degrees of curvature according to the needs and demand of each place and client.

In this article we will discuss about the installation of automatic doors, you can also get info about the installation process by visting Horton Automatics.

HOW TO INSTALL AN AUTOMATIC STEP-BY-STEP DOOR

Before we go into describing step by step the typical installation of an automatic doormotor, let’s look at the tools we will need:

  • Fixed key
  • drill
  • level
  • Small flat screwdriver.

Now let’s look at a step-by-step installation of a typical installation of an automatic slide door:

Let’s start by establishing an electrical pre-installation. This is essential to obtain the energy that the system requires. Next, we place the cables: We will find two of 4 x 0.25 mm square (they go to the sides) and one of 3 x 1.5 mm square that is the one that receives the power supply.

We continue with the installation of the base, at a prudent distance from the door, which can be 4 to 5 cm. We must fix the base very firmly, so we will use a drill, with bits of at least 10 mm.

Let’s continue, introducing the cables that we place in the first step, through a hole that has the base in its lower part, as well as by the base that the engine has to fix it to the metal base.

Before proceeding to place the zipper, it is necessary to unlock the engine. To do this, we insert the key into a lock that is arranged for this purpose on the front of the engine,we turn it and the window will open

At this point in the installation, the door must be closed. If so, we can already place a first piece of the zipper, at the end of the cancel.

Making sure it’s level is very easy to make use of the level we had from the beginning. We leave a space of approximately two millimeters between the zipper and the pine nuts.

Once we have placed the zipper, we must check that the cancel opens and closes easily, without any difficulty. Another important point is to make sure that at the end of the spring, it does not have contact with the zipper. If so, it is very likely that the cancellation will stop anywhere on the route.

Now we can put the final anchor of the engine. We install the end-of-race stops, at both ends, so that when the cancellation reaches any one of them, the system is operated and the electric current is cut off, causing the engine to stop.

We lock the engine again, close the window by turning the key and the installation will be finished.

Continue Reading

home decor ideas

Installation of Automatic Doors: Know the Advantages

Published

on

If you need a functional and aesthetic door for your garage, commerce or industry you must choose the best in the field, which take care of the smallest detail, from the initial advice to the installation of automatic doors.

Automatic doors generally have a mechanical device for opening and closing. Its activation can be given by various means; it can be through a remote control, with a motion sensor or even with a fingerprint.

The mechanism they have depends on the type of automatic door, i.e. each one includes a specially designed engine.

For example, the noisy motor that has your neighbor’s automatic door safely is chain, a mechanism that is usually employed in ascending type doors.

What Are The Advantages Of Installing An Automatic Door?

Installing an automatic door in your home, warehouse or commercial premises generates great advantages, for this gets more info here.

Aesthetically

These doors give elegance; giving a unique look to the place where you decide to install them, remember that you can choose from a huge amount of styles for every need.

For example, if you want to install in your office an automatic door in Altea you will surely find a wide variety of designs that will bring elegance and robustness to your space.

Unable to escape air conditioning

You can install an automatic door in any air-conditioned room and stop worrying if you’re one of those who forget to close the doors.

In addition, in the food industry it is very helpful to have an automatic door because it will certainly not be open preventing, not only that the air conditioning escapes but also prevents insects or other pollutants from entering.

Automatic doors provide security

For maximum security in your trade install an automatic door with security code to lock it, that way, if you are not on site to unlock it the door will not open in any way.

This code system is also useful for the automatic doors of your home, so that security is guaranteed while you are not at home.

Guaranteed effectiveness

Installing an automatic door is a major investment; however it is worth it if you take into account all the benefits they offer you.

Forget about making an effort to open or close it

The automated system included in these doors saves you the effort of having to open or close it manually.

Your weight can cause ailments that can eventually turn into a care injury. They are also ideal if people with special abilities live in your home.

The variety of styles and models of automatic doors that you can currently find on the market is also a great benefit.

You have the option to choose from a huge catalog or door that best suits your needs and budget.

In conclusion, if you are thinking of installing an automatic door take into account its functionality, design, robustness, practicality and its automated system so that you can enjoy all the benefits it offers in your home, commercial premises or warehouse.

Continue Reading

home decor ideas

How to Install a Door?

Published

on

Installing doors can be a complicated task if you do not have the appropriate information before starting the project. With a few tips and tricks, as well as the knowledge of the tools you can use, you will be able to make a successful project. For high performance work you can also get the door service by visiting our website Texas Access Controls.

Here are two methods by which you can install a door easily:

Method No 1. Take Out the Old Door

Remove the caulking on the edge of the door. Cut it gently using the corner of a chisel, passing through the entire length of the frame. This way, you’ll remove less paint along with the edge.

Remove all edges around the door frame. You can do it carefully using a hammer and chisel. Place the chisel between the edge and the wall. Then gently hit it with the hammer. Finally, move the chisel back and forth to loosen the edge. Make the edge aside, either to replace it later or to discard it.

Be very cautious when removing the edge in case you plan to reuse it when you finish installing the door. A cracked or broken edge will result in a less professional looking door.

Remove any nails or screws that join the door frame to the wall crossbars. You might need an arch saw, a chisel, and a hammer to completely remove the nails and screws from the crossbars.

When you’ve removed all the nails and screws, close the door and pin it in the direction you removed the edge. The door should fall easily through the opening. It is recommended that you ask a family member or friend for help in this step, especially if the door and frame weigh heavily.

Method No 2. Prepare the Place and the Door

Check the wall opening. This will have the width and height of the frame. The opening should be 5 cm (2 inches) wider and 5.7 cm (2 1/2 inches) taller than the actual size of the door you will install. If it is very large or very small, you will have to correct it or it will be difficult for you to install it.

For example, if you want to install a door about 75 cm (30 inches) wide, you’ll need an opening of about 80 cm (32 inches). A normal-sized door, which measures 200 cm (80 inches), should have an opening about 210 cm (82 1/2 inches) high.

Prepare the door to install. Remove any packing or shipping band that is still attached to the door. You will also need to remove the sleeves on the sides of the doors. You’ll even need to remove the lock holder located on one side of the door. If you don’t, you’ll have a lot of problems later on.

Continue Reading

home decor ideas

5 Amazing Storage Options for Your Kids’ Toys

Published

on

When children and their toys enter the picture, ensuring optimal home storage, especially in small spaces, becomes even more challenging and confusing. When it comes to toy storage, parents have had varying degrees of success with a variety of approaches over the years. With one of the toy storage organizers, you’ll make life a lot easier for yourself and safer for the entire family and you might even gain back most of your mental stability. Furthermore, it will allow you to teach your children to be responsible and tidy while also providing them with a convenient place to store their belongings. Here’s a list of toy storage organizers that will keep your home organized from toys.

The first amazing toy storage is the Natural/Primary Kids’ Toy Storage Organizer with 12 Plastic Bins by Humble Crew. This space-saving Toy Storage Organizer with 12 Plastic Bins arranges and stores a variety of children’s toys incoherent, convenient plastic bins. The removable 8 standard and 4 large easy access storage containers make it fun for kids to take out toys, books, and games for playtime and easy to clean up afterward. This toy storage box solution helps to keep your child’s room clean while also teaching color recognition, sorting, and mental function. The bins in this toy organizer are just the right height for toddlers and preschool-aged children. Such a piece of furniture is ideal for any home, regardless of size.

  • Woffit’s Toy Storage Organizer Chest

This flip lid toy storage makes it much easier than ever for your child to keep their room clean and orderly on their own. It has enough space to store stuffed toys, games, art and craft supplies, pillows, blankets, clothes, shoes, and other items. With dimensions of 30 x 15 x 16 inches, this large toy storage provides ample space for your child to store toys, books, and even clothing while still having room to spare. The toy chest brings a sophisticated touch to any room’s décor, making it perfect for use at home and in the nursery. This toy storage chest is made of 600D polyester, which is both softer and sturdier while still being tough enough to withstand daily use. It is made of an extra-thick 3mm board to ensure that it stays upright and maintains its shape.

  • Univivi’s Foldable Storage Bin

This is an amazing foldable and stackable design to save space in your home. The organizer cubes’ lids can keep dust at bay, allowing your clothes and toys to stay clean. This toy storage is made of a long-lasting non-woven fabric with high-quality cardboard on the sides and bottom. Even if the organizer box is full, it will not change shape. The design of the handles on both sides of the storage box cube keeps the organizer basket stable when moving. It measures 16.92″ (L) x 11.81″ (W) x 11.81″(H). It can store all of your seasonal clothing in a small space. After using the collapsible storage baskets, you’ll never be a mess again. Furthermore, the transparent window design makes stored items in the storage cube clear and see-through.

  • Gimars’ X-Large Toy Chest Box

Gimars Jute Storage Basket Bin has an X-Large size of 26″ L x 15″ W x 15″ H, making it an ideal storage solution for children’s toys, dog toys, baby diapers, books, clothes, and blankets. It also fits perfectly in cabinets and closets. It keeps everything neat and organized, and it looks great in any room. Its small size and lightweight make it ideal for travel. This upgraded well-standing toy storage includes 8 pieces of plastic inserts along the sides to keep the sides upright. The basket’s sturdy construction is due to a metal rod wrapped around the top rim to keep its shape. It has firm handles on both sides that make it simple to transport from place to place. It also has a waterproof PE coating for bath toy storage, making it very sturdy and simple to clean.

  • Dinosaur Toy Storage Basket

This toy storage basket is ideal for storing toys and laundry to keep your home neat and tidy. The storage bin’s two-handle design makes it easy to transport indoors or outdoors. It is ideal for use in the bedroom, bathroom, laundry room, children’s room, or utility room. This toy storage, which is printed with vibrant patterns, will go well with your existing home decor. It measures 20 X 20 X 14 in and has a large capacity for storing clothes, toys, pet supplies, books, and other items.

Takeaway

Toy storage, in addition to keeping a living space uncluttered, is your primary solution to seeing a living room full of brightly colored plastic, superheroes, and stuffed animals after your children have gone to bed. Take into account your toy storage bins as part of your décor rather than just a functional item, and you’ll be much happier with them.

Continue Reading

Trending