How To Install A Usb Wall Outlet

Do you want to avoid the limited number of power outlets in your office that make it difficult to access electricity easily? Do you know that a usb wall outlet can be the perfect solution? Installing one makes charging all your electronic gadgets easier, making life simpler. With our step-by-step guide, you will learn how to install a USB wall outlet and enjoy the convenience of always having power right at hand!

With technology becoming an increasingly integral part of our lives, it’s no surprise that many homeowners want to make their homes tech-friendly. One way to do this is to install USB wall outlets. These outlets offer two traditional three-prong outlets and two USB ports, making them an excellent convenience for charging phones and other electronics. 

Tools Needed 

Before starting the installation process, gathering the right tools and supplies is important. You will need a screwdriver, electrical tape, wire cutters, wire strippers, a voltage tester, and a USB wall outlet. If you are still getting familiar with wiring or have doubts about what you are doing, it’s best to consult an electrician before proceeding.  

Turn Off Power 

Safety is key when dealing with electricity. Therefore, you should always turn off the power before beginning any electrical work in your home. To ensure the power is turned off completely, use an outlet or voltage tester on the circuit breaker box before touching any wires. It’s also best practice to double-check by turning on any light switches connected to the outlet you plan to replace before beginning installation. If no lights come on, the power is off, and you can safely proceed with installing your new USB wall outlet.   

Wiring Instructions 

To begin wiring your new USB wall outlet, follow these steps:

• First, unscrew the faceplate from the existing outlet and disconnect all wires from its terminals using a screwdriver.
• Remove the mounting screws connecting the old outlet to its box in the wall.
• Finally, pull out the old outlet from its housing in the wall and discard it responsibly.

Once this is done, you are ready to wire your new USB wall outlet as per the manufacturer’s instructions included in your package. Typically there will be four colored wires black, white, red & ground.

Connect each wire accordingly by twisting them around their respective terminals until they are secure, and always check twice! Finally, reattach the mounting screws into the box in the wall firmly. This ensures that they fit properly into place. Next, attach the faceplate securely to the front of the new USB wall outlet. Finally, reattach the cover plate onto the circuit breaker box. Then turn the power back on at the circuit breaker box and test the new USB wall outlet by plugging something in. If all goes well, you should be able to successfully charge your phone or other device using one of its two built-in ports!   

Conclusion 

Installing a USB wall outlet is convenient and easy once you have gathered all the necessary tools. And supplies needed for the successful completion of the project, from screwdriver & electrical tape to voltage & wire testers. Anker provides appropriate wiring instructions included with the purchase of each unit. Following these simple steps will help ensure smooth installation allowing homeowners immediate access to charging devices quickly & easily! Whether as part of an overall home renovation or as an added convenience for charging electronics, having a usb wall outlet makes life much easier for everyone.